What is VLAN segmentation?

VLAN segmentation involves dividing a network into smaller, isolated segments using Virtual Local Area Networks (VLANs). This helps to enhance security and manage traffic more efficiently.

What are the prerequisites for using this skill?

You need managed switches that support 802.1Q VLAN trunking, a Layer 3 switch or firewall for inter-VLAN routing, and a solid understanding of VLAN concepts and network design.

Can this skill help with compliance requirements?

Yes, this skill is designed to assist in meeting compliance mandates such as PCI-DSS, HIPAA, and SOC 2, which require network isolation for sensitive data.

Is this skill suitable for all types of networks?

This skill is best suited for enterprise networks that require segmentation for security purposes. It may not be applicable for smaller networks or those that do not require such stringent security measures.

What types of switches are compatible with this skill?

The skill supports managed switches from vendors like Cisco, HP, and Juniper that are capable of 802.1Q VLAN trunking.

Configuring Network Segmentation with VLANs

Name: Configuring Network Segmentation with VLANs
Availability: InStock
Author: mukul975

Free

Implement VLAN-based network segmentation for enhanced security.

by mukul97527.6k stars on mukul975/anthropic-cybersecurity-skills

1 views

Updated Aug 8, 2026

Get this skill

Free · Opens the source repo

What Configuring Network Segmentation with VLANs does

This skill provides a structured approach to designing and implementing VLAN-based network segmentation using the 802.1Q standard on managed switches. It is particularly useful for isolating different zones within an enterprise network, such as corporate, servers, DMZ, guest, IoT, and more. By leveraging VLANs, users can effectively limit lateral movement of threats, thereby enhancing overall network security and compliance with regulations like PCI-DSS, HIPAA, and SOC 2.

The skill guides users through the entire process, starting with designing a VLAN architecture that aligns with security zones and function. It includes detailed configuration commands for popular managed switches like Cisco Catalyst, HP Aruba, and Juniper EX, ensuring that users can easily implement the necessary changes in their network environment. Additionally, the skill emphasizes the importance of hardening switches against VLAN hopping attacks and provides specific commands to enhance switch security.

For organizations looking to improve their security posture, this skill is invaluable. It not only helps in segmenting the network but also in implementing defense-in-depth strategies by combining VLANs with firewall rules and access control lists. This comprehensive approach ensures that sensitive data is adequately protected and that the blast radius of any potential security incidents is minimized.

Whether you're a network engineer tasked with enhancing security or a compliance officer ensuring that regulations are met, this skill offers the practical guidance and commands needed to effectively segment your network and secure critical infrastructure.

When to use it

Use this skill when you need to segment an enterprise network into isolated security zones or meet compliance mandates for network isolation.

When not to use it

This skill is not suitable for scenarios requiring air-gapping or when VLANs are the only security control in place without Layer 3 filtering.

What you can build with it

Enterprise Network Segmentation

Implement VLANs to create isolated security zones within a corporate network, enhancing security and compliance.

Compliance with Security Standards

Utilize VLAN segmentation to meet regulatory requirements for data protection and network isolation.

Mitigating Security Incidents

Reduce the impact of security incidents by limiting lateral movement through effective VLAN configurations.

How to install Configuring Network Segmentation with VLANs

View source

1. Install with the skills CLI

npx skills add mukul975/anthropic-cybersecurity-skills/configuring-network-segmentation-with-vlans --agent claude-code

2. Or install it manually

Download the skill folder and drop it into ~/.claude/skills/ for all projects, or .claude/skills/ to scope it to one repo. Restart Claude Code so it picks up the new skill.

Anthropic's agentic coding CLI, and the reference implementation of Agent Skills. Drop a skill folder into ~/.claude/skills and Claude Code loads it automatically whenever a task matches the skill's description. Claude Code docs

Inside SKILL.md

Written by mukul975

Configuring Network Segmentation with VLANs

When to Use

Segmenting an enterprise network into isolated security zones (corporate, servers, DMZ, guest, IoT)
Meeting compliance requirements (PCI-DSS, HIPAA, SOC 2) that mandate network isolation for sensitive data
Reducing blast radius of security incidents by preventing lateral movement between network segments
Isolating high-risk devices (IoT, BYOD, legacy systems) from critical infrastructure
Implementing defense-in-depth by combining VLANs with firewall rules and access control lists

Do not use VLANs as the sole security control without Layer 3 filtering, for isolating networks that require air-gapping, or without proper switch hardening against VLAN hopping attacks.

Prerequisites

Managed switches supporting 802.1Q VLAN trunking (Cisco Catalyst, HP Aruba, Juniper EX, etc.)
Layer 3 switch or firewall for inter-VLAN routing and access control
Network design document specifying VLAN assignments, IP subnets, and traffic flow requirements
Console or SSH access to switches with privileged configuration mode
Understanding of 802.1Q trunking, STP, and inter-VLAN routing concepts

Workflow

Step 1: Design the VLAN Architecture

# Define VLANs based on security zones and function

VLAN Plan:
  VLAN 10  - CORPORATE    (10.10.10.0/24)  - Employee workstations
  VLAN 20  - SERVERS      (10.10.20.0/24)  - Internal servers
  VLAN 30  - DMZ          (10.10.30.0/24)  - Internet-facing servers
  VLAN 40  - GUEST        (10.10.40.0/24)  - Guest WiFi
  VLAN 50  - IOT          (10.10.50.0/24)  - IoT/OT devices
  VLAN 60  - VOIP         (10.10.60.0/24)  - VoIP phones
  VLAN 100 - MANAGEMENT   (10.10.100.0/24) - Switch/AP management
  VLAN 999 - QUARANTINE   (10.10.99.0/24)  - Isolated/compromised hosts
  VLAN 998 - NATIVE_UNUSED                  - Native VLAN (no traffic)

# Traffic flow matrix:
# CORPORATE -> SERVERS: Allowed (specific ports)
# CORPORATE -> DMZ: Allowed (HTTP/HTTPS only)
# CORPORATE -> GUEST: Denied
# CORPORATE -> IOT: Denied
# GUEST -> Any Internal: Denied
# IOT -> SERVERS: Allowed (specific ports to specific hosts only)
# DMZ -> SERVERS: Allowed (database ports only)
# MANAGEMENT -> All: Allowed (from management stations only)

Step 2: Configure VLANs on Cisco Catalyst Switch

! Enter configuration mode
enable
configure terminal

! Create VLANs
vlan 10
  name CORPORATE
  exit
vlan 20
  name SERVERS
  exit
vlan 30
  name DMZ
  exit
vlan 40
  name GUEST
  exit
vlan 50
  name IOT
  exit
vlan 60
  name VOIP
  exit
vlan 100
  name MANAGEMENT
  exit
vlan 998
  name NATIVE_UNUSED
  exit
vlan 999
  name QUARANTINE
  exit

! Configure access ports for workstations (VLAN 10)
interface range GigabitEthernet1/0/1-24
  switchport mode access
  switchport access vlan 10
  switchport nonegotiate
  spanning-tree portfast
  spanning-tree bpduguard enable
  no shutdown
  exit

! Configure access ports for servers (VLAN 20)
interface range GigabitEthernet1/0/25-36
  switchport mode access
  switchport access vlan 20
  switchport nonegotiate
  spanning-tree portfast
  spanning-tree bpduguard enable
  no shutdown
  exit

! Configure trunk ports to other switches
interface GigabitEthernet1/0/48
  switchport mode trunk
  switchport trunk encapsulation dot1q
  switchport trunk native vlan 998
  switchport trunk allowed vlan 10,20,30,40,50,60,100
  switchport nonegotiate
  no shutdown
  exit

! Configure trunk to firewall/router
interface GigabitEthernet1/0/47
  switchport mode trunk
  switchport trunk encapsulation dot1q
  switchport trunk native vlan 998
  switchport trunk allowed vlan 10,20,30,40,50,60,100
  switchport nonegotiate
  no shutdown
  exit

! Shutdown unused ports
interface range GigabitEthernet1/0/37-46
  shutdown
  switchport mode access
  switchport access vlan 999
  exit

Step 3: Harden Switch Against VLAN Hopping

! Disable DTP on all ports (prevents switch spoofing)
interface range GigabitEthernet1/0/1-46
  switchport nonegotiate
  exit

! Set native VLAN to unused VLAN on all trunks
interface range GigabitEthernet1/0/47-48
  switchport trunk native vlan 998
  exit

! Enable DHCP Snooping
ip dhcp snooping
ip dhcp snooping vlan 10,20,30,40,50,60
interface GigabitEthernet1/0/47
  ip dhcp snooping trust
  exit

! Enable Dynamic ARP Inspection
ip arp inspection vlan 10,20,30,40,50,60
interface GigabitEthernet1/0/47
  ip arp inspection trust
  exit

! Enable IP Source Guard (prevents IP spoofing)
interface range GigabitEthernet1/0/1-36
  ip verify source
  exit

! Enable Port Security
interface range GigabitEthernet1/0/1-24
  switchport port-security
  switchport port-security maximum 2
  switchport port-security violation restrict
  switchport port-security aging time 60
  exit

! Set VTP to transparent mode (prevents VTP attacks)
vtp mode transparent

! Enable BPDU Guard globally
spanning-tree portfast bpduguard default

! Enable Storm Control
interface range GigabitEthernet1/0/1-36
  storm-control broadcast level 10
  storm-control multicast level 10
  storm-control action shutdown
  exit

Step 4: Configure Inter-VLAN Routing with ACLs

! On the Layer 3 switch or firewall, configure SVIs
interface Vlan10
  ip address 10.10.10.1 255.255.255.0
  no shutdown
  exit
interface Vlan20
  ip address 10.10.20.1 255.255.255.0
  no shutdown
  exit
interface Vlan30
  ip address 10.10.30.1 255.255.255.0
  no shutdown
  exit
interface Vlan40
  ip address 10.10.40.1 255.255.255.0
  no shutdown
  exit
interface Vlan50
  ip address 10.10.50.1 255.255.255.0
  no shutdown
  exit

! ACL: Corporate to Servers (allow specific services)
ip access-list extended CORP-TO-SERVERS
  permit tcp 10.10.10.0 0.0.0.255 10.10.20.0 0.0.0.255 eq 80
  permit tcp 10.10.10.0 0.0.0.255 10.10.20.0 0.0.0.255 eq 443
  permit tcp 10.10.10.0 0.0.0.255 10.10.20.0 0.0.0.255 eq 445
  permit udp 10.10.10.0 0.0.0.255 10.10.20.0 0.0.0.255 eq 53
  permit icmp 10.10.10.0 0.0.0.255 10.10.20.0 0.0.0.255 echo
  deny ip any any log
  exit

! ACL: Guest to Internet only (deny all internal)
ip access-list extended GUEST-OUTBOUND
  deny ip 10.10.40.0 0.0.0.255 10.0.0.0 0.255.255.255
  deny ip 10.10.40.0 0.0.0.255 172.16.0.0 0.15.255.255
  deny ip 10.10.40.0 0.0.0.255 192.168.0.0 0.0.255.255
  permit tcp 10.10.40.0 0.0.0.255 any eq 80
  permit tcp 10.10.40.0 0.0.0.255 any eq 443
  permit udp 10.10.40.0 0.0.0.255 any eq 53
  deny ip any any log
  exit

! ACL: IoT limited access
ip access-list extended IOT-OUTBOUND
  permit tcp 10.10.50.0 0.0.0.255 host 10.10.20.10 eq 443
  permit tcp 10.10.50.0 0.0.0.255 any eq 443
  permit udp 10.10.50.0 0.0.0.255 host 10.10.20.1 eq 53
  deny ip 10.10.50.0 0.0.0.255 10.10.50.0 0.0.0.255 log
  deny ip any any log
  exit

! Apply ACLs to VLAN interfaces
interface Vlan10
  ip access-group CORP-TO-SERVERS out
  exit
interface Vlan40
  ip access-group GUEST-OUTBOUND in
  exit
interface Vlan50
  ip access-group IOT-OUTBOUND in
  exit

Step 5: Configure DHCP and DNS per VLAN

! DHCP pools for each VLAN
ip dhcp pool CORPORATE
  network 10.10.10.0 255.255.255.0
  default-router 10.10.10.1
  dns-server 10.10.20.10
  domain-name corp.example.com
  lease 1
  exit

ip dhcp pool GUEST
  network 10.10.40.0 255.255.255.0
  default-router 10.10.40.1
  dns-server 1.1.1.1 8.8.8.8
  lease 0 4
  exit

ip dhcp pool IOT
  network 10.10.50.0 255.255.255.0
  default-router 10.10.50.1
  dns-server 10.10.20.10
  lease 7
  exit

! Exclude gateway and server IPs from DHCP pools
ip dhcp excluded-address 10.10.10.1 10.10.10.10
ip dhcp excluded-address 10.10.40.1 10.10.40.10
ip dhcp excluded-address 10.10.50.1 10.10.50.10

Step 6: Verify and Test Segmentation

# From a workstation on VLAN 10 (Corporate):
# Should succeed:
ping 10.10.20.10          # Server access
curl https://10.10.20.10  # HTTPS to server

# Should fail:
ping 10.10.40.100         # Guest VLAN - should be blocked
ping 10.10.50.100         # IoT VLAN - should be blocked

# From a device on VLAN 40 (Guest):
# Should succeed:
ping 8.8.8.8              # Internet access
curl https://www.google.com

# Should fail:
ping 10.10.10.1           # Corporate gateway - blocked
ping 10.10.20.10          # Server - blocked

# Verify switch configuration
show vlan brief
show interfaces trunk
show ip arp inspection statistics
show ip dhcp snooping binding
show port-security
show ip access-lists

# Run VLAN hopping tests (from authorized pentest)
# These should all fail if hardening is correct:
# 1. DTP negotiation - should fail (nonegotiate)
# 2. Double tagging - should fail (native VLAN 998)
# 3. ARP spoofing - should fail (DAI enabled)

Key Concepts

Term	Definition
VLAN (Virtual LAN)	Logical network partition at Layer 2 that groups switch ports into isolated broadcast domains, regardless of physical location
802.1Q Trunking	IEEE standard for VLAN tagging that adds a 4-byte header to Ethernet frames, identifying which VLAN a frame belongs to across trunk links
Inter-VLAN Routing	Layer 3 forwarding of traffic between VLANs using a router, Layer 3 switch, or firewall with access control lists
Native VLAN	VLAN assigned to untagged frames on trunk ports; should be set to an unused VLAN to prevent VLAN hopping attacks
DHCP Snooping	Switch feature that validates DHCP messages and builds a binding table of IP-MAC-port mappings, preventing rogue DHCP servers
Port Security	Switch feature that limits the number of MAC addresses per port and takes action (shutdown, restrict) when violated

Tools & Systems

Cisco Catalyst/Nexus: Enterprise managed switches with comprehensive VLAN, trunking, and security feature support
HP Aruba CX: Enterprise switches with REST API management and VLAN segmentation capabilities
pfSense/OPNsense: Open-source firewalls for inter-VLAN routing with stateful access control
NetBox: Open-source IPAM and DCIM tool for documenting VLAN assignments, IP addressing, and network topology
Nmap: Network scanner for verifying segmentation effectiveness by testing reachability across VLAN boundaries

Common Scenarios

Scenario: Implementing PCI-DSS Compliant Network Segmentation for Retail

Context: A retail chain must isolate their payment card processing systems from the general corporate network to meet PCI-DSS requirements. The current flat network has point-of-sale terminals, employee workstations, inventory servers, and guest WiFi on a single VLAN. The environment uses Cisco Catalyst 9300 switches.

Approach:

Design VLAN architecture: POS terminals on VLAN 50 (CDE), corporate on VLAN 10, servers on VLAN 20, guest on VLAN 40
Create VLANs on all access-layer switches and configure access ports by function
Configure trunk links between switches with explicit VLAN allowed lists (no "all" trunks)
Set native VLAN to 998 (unused) on all trunks and disable DTP on every port
Configure ACLs on the Layer 3 switch: CDE VLAN can only reach the payment processor's IP on port 443; no other inter-VLAN traffic to/from CDE
Enable DHCP snooping, DAI, and port security on all access ports
Verify segmentation with penetration testing from each VLAN, confirming CDE is fully isolated

Pitfalls:

Leaving DTP enabled on access ports, allowing VLAN hopping to reach the CDE
Using VLAN 1 as the native VLAN, enabling double-tagging attacks
Not restricting trunk allowed VLANs, carrying all VLANs including CDE to non-essential switches
Creating ACLs that allow "any" source to reach CDE servers instead of specific POS terminal IPs

Output Format

## Network Segmentation Implementation Report

**Network**: Retail Store #42
**Switch Platform**: Cisco Catalyst 9300
**VLANs Configured**: 8

### VLAN Summary

| VLAN ID | Name | Subnet | Ports | Purpose |
|---------|------|--------|-------|---------|
| 10 | CORPORATE | 10.10.10.0/24 | Gi1/0/1-24 | Employee workstations |
| 20 | SERVERS | 10.10.20.0/24 | Gi1/0/25-36 | Internal servers |
| 30 | DMZ | 10.10.30.0/24 | Gi2/0/1-4 | Internet-facing |
| 40 | GUEST | 10.10.40.0/24 | WiFi AP trunk | Guest WiFi |
| 50 | CDE | 10.10.50.0/24 | Gi2/0/5-12 | POS terminals |
| 100 | MGMT | 10.10.100.0/24 | Gi1/0/48 | Switch management |
| 998 | NATIVE | N/A | Trunks only | Unused native |
| 999 | QUARANTINE | 10.10.99.0/24 | Unused ports | Isolation |

### Security Hardening Status

| Control | Status |
|---------|--------|
| DTP Disabled (nonegotiate) | All ports |
| Native VLAN (998) | All trunks |
| DHCP Snooping | VLANs 10,20,40,50 |
| Dynamic ARP Inspection | VLANs 10,20,40,50 |
| Port Security | Access ports |
| BPDU Guard | Access ports |
| Unused Ports Shutdown | 10 ports in VLAN 999 |
| VTP Transparent Mode | Enabled |

Frequently asked questions about Configuring Network Segmentation with VLANs

Similar skills

Resemble Detect

Detect and analyze AI-generated media for authenticity.

Licenca para Auditar

Comprehensive security audits and threat modeling for projects.

Authenticated Vulnerability Scan

Run deep vulnerability scans with valid credentials.

Agentless Vulnerability Scanning

Assess systems for vulnerabilities without agents.

Implementing Rapid7 InsightVM for Scanning

Streamline vulnerability management with InsightVM setup.

Next-Generation Firewall Deployment

Streamline Palo Alto firewall configuration and management.