Worktrunk

Help users work with Worktrunk, a CLI tool for managing git worktrees.

Available documentation

Reference files are synced from worktrunk.dev documentation:

• reference/config.md: User and project configuration (LLM, hooks, command defaults)
• reference/hook.md: Hook types, timing, and execution order
• reference/switch.md, merge.md, list.md, etc.: Command documentation
• reference/extending.md: Aliases, multi-step pipelines, custom subcommands, and template-expansion gotchas (two-pass {% raw %} deferral, for-each recipes)
• reference/llm-commits.md: LLM commit message generation
• reference/tips-patterns.md: Practical recipes — aliases, per-branch variables, dev server per worktree, parallel agent patterns
• reference/shell-integration.md: Shell integration debugging
• reference/troubleshooting.md: Troubleshooting for LLM and hooks (Claude-specific)

For command-specific options, run wt <command> --help. For configuration, follow the workflows below.

Two types of configuration

Worktrunk uses two config files with different scopes and permission models:

User config (~/.config/worktrunk/config.toml, never checked into git) holds personal preferences: LLM integration, worktree path templates, command settings, user hooks. Treat it conservatively — propose changes and get consent before editing, never install tools on the user's behalf, and preserve the file's existing structure and comments. See reference/config.md.

Project config (<repo>/.config/wt.toml, checked into git) holds team-wide automation: hooks for the worktree lifecycle (pre-start, pre-merge, etc.). Edit proactively — changes are versioned and reversible via git. Comment why each hook exists, and warn the user before adding destructive commands (rm -rf, DROP TABLE), network fetches piped to shells, or sudo. See reference/hook.md.

Some requests span both: commit-message generation is user config, while the team's quality checks are project config.

Core workflows

Setting up commit message generation (user config)

Detect which tools are installed (which claude codex llm aichat); if none, recommend Claude Code. Take the exact command for the chosen tool from reference/llm-commits.md, propose the [commit.generation] change, and apply it after approval (wt config create first if no config exists). To verify, wt step commit --dry-run renders the prompt, runs the LLM, and prints the message without committing.

Configuring project hooks

Pick the hook type by when the command should run and whether it may block (10 types: 5 events × pre/post — full reference in reference/hook.md):

• Dependencies and env files a later step needs → pre-start (blocks creation)
• Dev servers, long builds, cache copying → post-start (background)
• Formatters, linters, type checks → pre-commit
• Tests that must pass before merging → pre-merge
• CI triggers, notifications → post-commit
• Deployment → post-merge
• Setup before branch resolution / terminal-IDE updates → pre-switch / post-switch
• Cleanup before/after removal (save artifacts; stop servers, remove containers) → pre-remove / post-remove

Derive the commands from the project itself (package.json scripts, Cargo.toml, pyproject.toml) and verify they run before adding them.

When a new hook must wait for an existing one, convert the entry to a pipeline; independent commands in a named table run concurrently:

# Pipeline: install completes before migrate starts
[[pre-start]]
install = "npm install"

[[pre-start]]
migrate = "npm run db:migrate"

# Concurrent: independent commands in one table
[pre-start]
install = "npm install"
env = "cp .env.example .env"

Test with wt switch --create test-hooks.

Common tasks reference

User config tasks

• Set up commit message generation → reference/llm-commits.md
• Customize worktree paths → reference/config.md#worktree-path-template
• Custom commit templates → reference/llm-commits.md#prompt-templates
• Configure command defaults → reference/config.md#command-config
• Set up personal hooks → reference/config.md#hooks

Project config tasks

• Set up hooks for new project → reference/hook.md
• Add hook to existing config → reference/hook.md#hook-forms
• Use template variables → reference/hook.md#template-variables
• Add dev server URL to list → reference/config.md#dev-server-url

Aliases & multi-worktree tasks

• Create a wt alias → reference/extending.md#aliases
• Run a command in every worktree → reference/step.md#wt-step-for-each
• Rebase every worktree (up-style) → reference/extending.md#recipe-rebase-every-worktree-onto-its-upstream
• Defer a template variable to a nested wt command → reference/extending.md#deferring-expansion-to-a-nested-wt-command

Key commands

# View all configuration
wt config show

# Create initial user config (LLM/commit setup: see reference/llm-commits.md)
wt config create

# Full config reference (subcommands, templates, env vars)
wt config --help

Hook approvals in non-interactive sessions

Worktrunk never runs a project's hooks or aliases until the user has explicitly approved them. The commands in .config/wt.toml are arbitrary shell code shipped in a repository the user may have just cloned, so on first run Worktrunk shows each command and waits for the user to approve it — an untrusted .config/wt.toml cannot silently execute anything. Approvals are stored per-project in ~/.config/worktrunk/approvals.toml and re-prompted whenever a command template changes, so a hook can't be swapped for a different command after it was approved.

Agents running wt merge, wt switch, or other commands that trigger hooks will hit an error like:

▲ cargo-difftest needs approval to execute 1 command:
○ post-merge install:
  cargo install --path .
✗ Cannot prompt for approval in non-interactive environment
↳ To skip prompts in CI/CD, add --yes; to pre-approve commands, run wt config approvals add

The resolution is for the user to make the trust decision themselves:

• wt config approvals add — interactive prompt where the user reviews each command before it is stored to ~/.config/worktrunk/approvals.toml. Run once per project; the approval persists across invocations until the command template changes or the project moves. This is the path to recommend — the user reviews and consents to exactly the commands that will run.

When invoked as an agent, stop and escalate to the user. Approving a project's hooks is a security decision about whether this repository should be trusted to run arbitrary commands on the user's machine — that decision belongs to the user, not the agent. Tell the user to run wt config approvals add and let them review the commands. Do not run --yes on the user's behalf: it skips the approval gate for that invocation, so reaching for it to unblock a command defeats the protection. --yes exists for CI/CD pipelines that already control their own hook contents; it is not a shortcut for an interactive agent to silence an approval prompt.

Advanced: agent handoffs

When the user requests spawning a worktree with an agent in a background session ("spawn a worktree for...", "hand off to another agent"), use the appropriate pattern for their terminal multiplexer. Substitute <agent-cli> with the CLI you are running as: claude for Claude Code, 'opencode run' for OpenCode.

tmux (check $TMUX env var):

tmux new-session -d -s <branch-name> "wt switch --create <branch-name> -x <agent-cli> -- '<task description>'"

Zellij (check $ZELLIJ env var):

zellij run -- wt switch --create <branch-name> -x <agent-cli> -- '<task description>'

Requirements (all must be true):

• User explicitly requests spawning/handoff
• User is in a supported multiplexer (tmux or Zellij)
• The user's project instructions (CLAUDE.md or AGENTS.md) or an explicit prompt authorize this pattern

Do not use this pattern for normal worktree operations.

Example (tmux, Claude Code):

tmux new-session -d -s fix-auth-bug "wt switch --create fix-auth-bug -x claude -- \
  'The login session expires after 5 minutes. Find the session timeout config and extend it to 24 hours.'"

Example (Zellij, OpenCode):

zellij run -- wt switch --create fix-auth-bug -x 'opencode run' -- \
  'The login session expires after 5 minutes. Find the session timeout config and extend it to 24 hours.'

Parallel sub-Agents (single Claude Code session)

To spawn multiple sub-Agents that each work in their own worktree from one Claude Code session — no terminal multiplexer, no human in the other pane — pre-start each worktree from the parent and pass the path into the sub-Agent prompt:

wt switch --create <branch> --no-cd --no-hooks

Then call the Agent tool without isolation: "worktree", naming the path in the prompt:

You are working in `/abs/path/to/worktrunk.<branch>` on branch `<branch>`.
All edits must stay in that worktree.

--no-cd skips the shell-integration cd script the parent can't consume; --no-hooks is appropriate when each sub-Agent will run its own build/test step (e.g. cargo run -- hook pre-merge --yes) and you don't need post-start setup repeated per worktree.

Do not use Agent { isolation: "worktree" } for this. Claude Code passes its internal agent ID as name to the WorktreeCreate hook, so wt creates the worktree as worktrunk.agent-<id> on a throwaway branch. If the sub-Agent then creates a feature branch on top, you end up with non-canonical paths, orphan branches, and post-start hooks fired against the wrong branch. Pre-creating with wt switch --create keeps path, branch, and hook target aligned.